Sheeter 568, Saddle Stitch

New product

  • In-line saddle stitching
  • Stacking for near-line finishing
  • Lightweight compatible
  • Easy application changes

WATCH VIDEO

Solution Modules

UNWINDER 550 CUTTER 561/562 STACKER 566 FEEDER 568 DELIVERY TABLE

Turn-Station

More details

More info

Optional Capabilities

Lightweight Paper
For lightweight paper applications, add the optional Buffer 530 to the Sheeter 568 system. Positioned between the printer and the Cutter 561, the Buffer 530 accumulates the lightweight paper web and weaves it through rollers that rise and fall, filling the buffer and allowing job delivery without stopping the printer.

Slit Merge
The Merger 535 option allows a 2-up printed web to be slit and merged into a single, collated paper stream. Positioned between the printer and the Cutter 561*, the web enters the Merger 535 and is slit in the center. A sensor continuously monitors the web for side-to-side variations or movement and the slitter automatically adjusts to cut precisely at the center of the web. The resulting two webs are then merged right-over-left or left-over-right, depending on the requirements of the application.

*Pinless slit merge applications require the Cutter 562.

Cutter 562
Same features as the Cutter 561, plus the ability to process pinless slit merge applications.

Product Description

The Sheeter 568 system for in-line saddle stitch features the Unwinder 550, Cutter 561, Stacker 566, Feeder 568 and conveyor, and generates individual sheets for in-line stitching or neat paper stacks for book blocks.

The center-shaft driven Unwinder 550 feeds a roll of paper up to 20.5” wide and 52” in diameter into the printer for continuous printing. Once the paper is printed, the Cutter 561 uses a rotary knife to cut printed output to the desired length.

For stitched booklets, individual sheets are then bypassed through the Stacker 566 and the Feeder 568 delivers them in sequence to the saddle stitcher. There, each sheet is individually scored, folded and collated into a set, then stitched and trimmed to create a finished booklet, with or without a printed cover.

For near-line or off-line finishing, the Stacker 566 builds 8.5” stacks, 1-up, 2-up or 3-up, to be easily transported to near-line finishing units, such as perfect binders.

Technical Specifications

Speed max.

106 m/min ≈ 350 ft/min (stacker), 137 m/min ≈ 450 ft/min (stitcher)

Feeding

Pinfed or Pinless

Paper Weight

40 – 200 gsm (test req. under 55)

Web width

140 – 520 mm ≈ 5.5″ – 20.5″

Form Length

3.5 – 19.5 in / 90 – 495 mm

Stack height

216 mm ≈ 8.5″

Offset

15 mm ≈ 0.6″

Output Options

1-up with offset, 2-up with offset, 3-up with offset

xSheeter_568_SaddleStitch_Schema.png.pag

6 other products in the same category:

Download